OCPC PISTA DDR5 6000MHZ 32GB RGB DESKTOP RAM
Out Of Stock
OCPC PISTA DDR5 6000MHZ 32GB RGB DESKTOP RAM
- Stock: Out Of Stock
- Model: Model-97523
- Product id: 24585
* অনলাইনে প্রোডাক্ট অর্ডারের পূর্বে হেল্পলাইন থেকে স্টক এবং ডেলিভারী সর্ম্পকে সঠিকভাবে জেনে অর্ডার করার জন্য বিশেষভাবে অনুরোধ করা যাচ্ছে *
- Capacity: 32GB
- Channel: Dual Channel
- Tested Speed: 6000MHz
- Tested Latency: CL32-38-38-76
Quick Compare
| Product Details | |||
| Product | OCPC PISTA DDR5 6000MHZ 32GB RGB DESKTOP RAM | Adata 4GB DDR3 1333MHz Desktop Ram | KingSpec NE 128GB NVMe M.2 2280 PCIe SSD |
| Image |  |
 |
 |
| Price | |
|
|
| Model | Model-97523 | Adata 4GB DDR3 1333MHz | NE-128 |
| Brand | OCPC | ADATA | KingSpec |
| Availability | Out Of Stock | In Stock | In Stock |
| Rating | Based on 0 reviews. |
Based on 0 reviews. |
Based on 0 reviews. |
| Summary | Specification Technical Information Series PISTA RGB Capacity 32GB (16GBx2) Memory Type DDR5 Bus-Speed 6000MHz Single/Dual Sticks Dual Channel Kit Latency CL32-38-38-76 Voltage 1.35V Color Black Heat Sink Type Yes Features Unbuffered,Non-ECC Height 46.9mm / 1.85inch Warranty Limited Lifetime OCPC PISTA DDDR5 6000MHz 32GB RGB Desktop Ram The OCPC PISTA DDR5 6000MHz 32GB RGB Desktop RAM is a high-performance memory kit that comes with two 16GB unbuffered modules, offering a total of 32GB capacity. It operates on a dual-channel system and has been tested for speeds up to 6000MHz with a latency rating of CL32-38-38-76. The voltage required for optimal performance is 1.35V. This DDR5 RAM does not have error-correcting code (ECC) capabilities but it does come equipped with a heatsink. The product is backed by a limited lifetime warranty. Additionally, this RAM is designed with RGB lighting, which can provide a visually impressive experience while adding a unique aesthetic touch to the user's computer setup. .. | Adata 4GB DDR3 1333MHz Desktop Ram The Adata 4GB DDR3 1333MHz Desktop Ram module is a 512Mx72 bits 4GB(4096MB) DDR3-1333(CL9)-9-9-24 SDRAM memory module. The SPD is programmed to JEDEC standard latency 1333Mbps timing of 9-9-9-24 at 1.35V. Adata 4GB DDR3 1333MHz module is composed of eight-teen 256Mx8 bits CMOS DDR3 SDRAMs in FBGA package and one 2Kbit EEPROM in 8pin TDFN package on a 240pin glass–epoxy printed circuit board. Adata 4GB DDR3 1333MHz module is a Dual In-line Memory Module and intended for mounting onto 240-pins edge connector sockets. Synchronous design allows precise cycle control with the use of system clock. Data I/O transactions are possible on both edges of DQS. Range of operating frequencies, programmable latencies and burst lengths allow the same device to be useful for a variety of high bandwidth, high-performance memory system applications. Adata 4GB DDR3 1333MHz Desktop Ram Review Purchased this for an older Biostar motherboard mATX. Was not sure it would match its predecessor memory of the same bandwidth and speed etc. But it did and now I have 8 gigs of solid working memory. Boosted system performance significantly. Would recommend! Good memory at a good price. Despite it's different look, it perfectly matched the other 4GB ADATA stick with heat spreader that I had, allowing me to easily upgrade my workstation to 8GB. Working at 1333MHz @ 9-9-9-24 with no issues. As other reviews already state, this RAM does its' job. The price is great, and despite being a lower frequency than other choices there isn't a performance difference. This is great RAM for cheap, I'd recommend it to anyone. Specifications Power supply (Normal): VDD & VDDQ = 1.35V (1.283V to 1.45V) Backward-compatible to VDD=+1.5V+-0.075V MRS Cycle with address key programs - CAS Latency (6,7,8,9) - Burst Length (BL):8 and 4 with Burst Chop(BC) Bi-directional, differential data strobe (DQS and /DQS) Differential clock input (CK, /CK) operation DLL aligns DQ and DQS transition with CK transition Double-data-rate architecture; two data transfers per clock cycle 8 independent internal bank Internal (self) calibration: Internal self calibration through ZQ pin (RZQ:240 ohm±1%) Auto refresh and self refresh Average Refresh Period 7.8us at lower then TCASE 85°C, 3.9us at 85°C < TCASE ≤ 95°C 8-bit pre-fetch. On Die Termination using ODT pin. On-board I2C temperature sensor with integrated serial presence-detect (SPD) EEPROM. EEPROM software write protect. Lead-free products are RoHS Compliant .. | SpecificationSSDCapacity(GB)128GBForm FactorM.2 2280Interface TypePCI-E Gen3 X4MTBF1 Million HoursSequential R/WRead Speed: 2400~2700MB/S· Write Speed: 1900~2000MB/SFlash Type3D TLCDimensionL80.0mm*W22.0mm*H2.1mm ±0.15mmOperating Temperature0℃--+70℃Storage Temperature-20℃--+75℃Warranty3 YearsKingSpec NE 128GB NVMe M.2 2280 PCIe SSDThe KingSpec NE 128GB NVMe M.2 2280 PCIe SSD comes with 128GB capacity. It offers fast and continuous read-write speeds to help you improve working efficiency, gaming experience, and graphics quality. The KingSpec NE comes with 5 layer graphene copper foil heat sink to make more excellent performance. This SSD features Exclusive 3D NAND Firmware Technology, which is a Strict selection of stable and high-performance 64-layer 3D NAND flash memory and high-performance main control chips, achieving enhanced performance and stability. KingSpec NE SSD comes with a High-level LDPC Debugging Mechanism, that ensures the accuracy of data transmission, protects data security, and extends the using life. The KingSpec NE 128GB NVMe M.2 2280 PCIe SSD has 3 years of warranty... |
Related Product
Recently Viewed
