APACER NOX RGB AURA2 8GB DDR4 3200MHz Desktop RAM
-100 %
In Stock
APACER NOX RGB AURA2 8GB DDR4 3200MHz Desktop RAM
- Stock: In Stock
- Model: AURA2 8GB DDR4 3200MHz
- Product id: 23077
* অনলাইনে প্রোডাক্ট অর্ডারের পূর্বে হেল্পলাইন থেকে স্টক এবং ডেলিভারী সর্ম্পকে সঠিকভাবে জেনে অর্ডার করার জন্য বিশেষভাবে অনুরোধ করা যাচ্ছে *
- Capacity: 8GB
- Frequency: 3200MHz, PIN: 288-pin
- Memory Architecture: x8 FBGA DRAM chip
- Voltage & Cas Latency: 1.2V/16-18-18-38
| Key Features | |
| Capacity | 8GB |
| Operating voltage | 1.35V |
| Type | DDR4 |
| Frequency | 3200MHz |
| Latency | 16-20-20-38 |
| Physical Specification | |
| Pin | 288-Pins |
| Warranty Information | |
| Warranty | Lifetime Warranty |
APACER NOX RGB AURA2 8GB DDR4 3200MHz Desktop RAM
The NOX RGB 8GB 3200MHz is an RGB Lighting Diffuser with an Ultra-wide Angle. Exquisite engraved lighting bar design and RGB lighting effect with an ultra-wide-angle. This RAM has a high-quality aluminum heat sink. The enigmatic black and minimalist-designed high-class aluminum heat sink not only has excellent heat dissipation but also quickly displays the gamer's exploding vitality. Its DRAM ICs have been meticulously screened. The rigorously screened DRAM ICs offer great stability and compatibility with key motherboards, based on Apacer's extensive industry expertise. Users may easily modify patterns to suit their personality thanks to the APACER AURA2 RGB Synchronization Certification, which supports synchronization effects with ASUS AURA Sync, GIGABYTE RGB Fusion 2.0, MSI Mystic Light Sync, and ASRock Polychrome Sync.
It supports Intel XMP 2.0, allowing users to overclock in a single step without having to make manual tweaks to BIOS settings. This RAM features a high level of stability for the best possible experience. When it comes to gaming and overclocking, low latency reduced power consumption with less heat, and more dependability gives consumers the quickest speeds and the most stability. Its QVL Compatibility Certification ensures its stability with all motherboards on the QVL (Qualified Vendor List) by repeated compatibility verifications with the majority of popular motherboard makers.
Quick Compare
| Product Details | |||
| Product | APACER NOX RGB AURA2 8GB DDR4 3200MHz Desktop RAM | Adata 4GB DDR3 1333MHz Desktop Ram | KingSpec NE 128GB NVMe M.2 2280 PCIe SSD |
| Image | |
|
|
| Price | |
|
|
| Model | AURA2 8GB DDR4 3200MHz | Adata 4GB DDR3 1333MHz | NE-128 |
| Brand | Apacer | ADATA | KingSpec |
| Availability | In Stock | In Stock | In Stock |
| Rating | Based on 0 reviews. |
Based on 0 reviews. |
Based on 0 reviews. |
| Summary | APACER NOX RGB AURA2 8GB DDR4 3200MHz Desktop RAM The NOX RGB 8GB 3200MHz is an RGB Lighting Diffuser with an Ultra-wide Angle. Exquisite engraved lighting bar design and RGB lighting effect with an ultra-wide-angle. This RAM has a high-quality aluminum heat sink. The enigmatic black and minimalist-designed high-class aluminum heat sink not only has excellent heat dissipation but also quickly displays the gamer's exploding vitality. Its DRAM ICs have been meticulously screened. The rigorously screened DRAM ICs offer great stability and compatibility with key motherboards, based on Apacer's extensive industry expertise. Users may easily modify patterns to suit their personality thanks to the APACER AURA2 RGB Synchronization Certification, which supports synchronization effects with ASUS AURA Sync, GIGABYTE RGB Fusion 2.0, MSI Mystic Light Sync, and ASRock Polychrome Sync. It supports Intel XMP 2.0, allowing users to overclock in a single step without having to make manual tweaks to BIOS settings. This RAM features a high level of stability for the best possible experience. When it comes to gaming and overclocking, low latency reduced power consumption with less heat, and more dependability gives consumers the quickest speeds and the most stability. Its QVL Compatibility Certification ensures its stability with all motherboards on the QVL (Qualified Vendor List) by repeated compatibility verifications with the majority of popular motherboard makers. .. | Adata 4GB DDR3 1333MHz Desktop Ram The Adata 4GB DDR3 1333MHz Desktop Ram module is a 512Mx72 bits 4GB(4096MB) DDR3-1333(CL9)-9-9-24 SDRAM memory module. The SPD is programmed to JEDEC standard latency 1333Mbps timing of 9-9-9-24 at 1.35V. Adata 4GB DDR3 1333MHz module is composed of eight-teen 256Mx8 bits CMOS DDR3 SDRAMs in FBGA package and one 2Kbit EEPROM in 8pin TDFN package on a 240pin glass–epoxy printed circuit board. Adata 4GB DDR3 1333MHz module is a Dual In-line Memory Module and intended for mounting onto 240-pins edge connector sockets. Synchronous design allows precise cycle control with the use of system clock. Data I/O transactions are possible on both edges of DQS. Range of operating frequencies, programmable latencies and burst lengths allow the same device to be useful for a variety of high bandwidth, high-performance memory system applications. Adata 4GB DDR3 1333MHz Desktop Ram Review Purchased this for an older Biostar motherboard mATX. Was not sure it would match its predecessor memory of the same bandwidth and speed etc. But it did and now I have 8 gigs of solid working memory. Boosted system performance significantly. Would recommend! Good memory at a good price. Despite it's different look, it perfectly matched the other 4GB ADATA stick with heat spreader that I had, allowing me to easily upgrade my workstation to 8GB. Working at 1333MHz @ 9-9-9-24 with no issues. As other reviews already state, this RAM does its' job. The price is great, and despite being a lower frequency than other choices there isn't a performance difference. This is great RAM for cheap, I'd recommend it to anyone. Specifications Power supply (Normal): VDD & VDDQ = 1.35V (1.283V to 1.45V) Backward-compatible to VDD=+1.5V+-0.075V MRS Cycle with address key programs - CAS Latency (6,7,8,9) - Burst Length (BL):8 and 4 with Burst Chop(BC) Bi-directional, differential data strobe (DQS and /DQS) Differential clock input (CK, /CK) operation DLL aligns DQ and DQS transition with CK transition Double-data-rate architecture; two data transfers per clock cycle 8 independent internal bank Internal (self) calibration: Internal self calibration through ZQ pin (RZQ:240 ohm±1%) Auto refresh and self refresh Average Refresh Period 7.8us at lower then TCASE 85°C, 3.9us at 85°C < TCASE ≤ 95°C 8-bit pre-fetch. On Die Termination using ODT pin. On-board I2C temperature sensor with integrated serial presence-detect (SPD) EEPROM. EEPROM software write protect. Lead-free products are RoHS Compliant .. | SpecificationSSDCapacity(GB)128GBForm FactorM.2 2280Interface TypePCI-E Gen3 X4MTBF1 Million HoursSequential R/WRead Speed: 2400~2700MB/S· Write Speed: 1900~2000MB/SFlash Type3D TLCDimensionL80.0mm*W22.0mm*H2.1mm ±0.15mmOperating Temperature0℃--+70℃Storage Temperature-20℃--+75℃Warranty3 YearsKingSpec NE 128GB NVMe M.2 2280 PCIe SSDThe KingSpec NE 128GB NVMe M.2 2280 PCIe SSD comes with 128GB capacity. It offers fast and continuous read-write speeds to help you improve working efficiency, gaming experience, and graphics quality. The KingSpec NE comes with 5 layer graphene copper foil heat sink to make more excellent performance. This SSD features Exclusive 3D NAND Firmware Technology, which is a Strict selection of stable and high-performance 64-layer 3D NAND flash memory and high-performance main control chips, achieving enhanced performance and stability. KingSpec NE SSD comes with a High-level LDPC Debugging Mechanism, that ensures the accuracy of data transmission, protects data security, and extends the using life. The KingSpec NE 128GB NVMe M.2 2280 PCIe SSD has 3 years of warranty... |
|
|
|
|
|
Related Product
Recently Viewed
31,500৳ 33,800৳
Ex Tax:31,500৳